[48V-1.5A][4Pin] OEM Swann NVR-88580 / NVR8-8580RN / NVR8-8780 / SWNVR-8580 / SWNVR-88580H / NVR8-8600 (SRNVR-88600T) Series - Power Supply Adapter Wall Charger

Swann (match 48V 1.5A 4-pin on your label):

• NVR8-8580
• NVR8-8580RN (8580RN)
• NVR8-8780
• SWNVR-8580 / SWNVR-88580H
• NVR8-8600 (SRNVR-88600T)

Tip: Model strings vary between labels/boxes — match by plug (4-pin) and rating (48V 1.5A) for guaranteed fit.

When to Replace

• No power — LEDs off, no fan/HDD activity.
• Boot hang — stuck on splash screen (insufficient current).
• HDD not detected — weak supply won’t spin the drive reliably.
• PSU LED on but NVR unstable — partial adaptor failure under load.

Quick Replacement Steps

1. Power down the recorder and unplug from mains.
2. Remove the 4-pin plug from the NVR and the IEC lead from the wall.
3. Connect the new 48V 1.5A 4-pin adaptor and included IEC cable.
4. Restore power and confirm the NVR boots and detects the HDD.

Also known as: Swann NVR power supply 48V 1.5A, Swann 4-pin NVR power adaptor, Swann 4 pin 48V power adapter, Swann NVR PSU 4 pin, NVR8-8580 power supply, 8580RN power adaptor, NVR8-8780 power supply, NVR8-8600 power supply, SRNVR-88600T power supply, SWNVR-8580 power supply, SWNVR-88580H power adaptor, CONCORD NVR power supply 48V, Jaycar CONCORD 4 pin power supply, Electus CONCORD NVR power adapter, 4 pin round NVR power supply, CCTV NVR power adapter 48V 1.5A, Swann NVR replacement power supply, 48V 1.5A NVR adaptor, 4 pin 48V 1.5A PSU, FJ-SW20254801500 power supply, CS-4801500 adapter, Swann 48V 4 pin adapter, Swann 48V 1.5A 4 pin, replacement NVR power supply 48V.